CNC Lathe

CNC Lathe

lathing, What is lathing? What is Turning?

In a lathe (CNC lathe, CNC Turning machine), the workpiece spins around its axis, while the cutting tool does not spin. Lathe is referred to as “Turning”, and is effective for making cylindrical parts. Common Turning operations include drilling, boring, threading, ID and OD grooving.

Desheng Precision provide lathing, CNC machining,Machining CNC, CNC Turning, CNC lathe, CNC milling service.

Service Available:

CNC machining

CNC Milling

CNC Turning

CNC machining services

Precision CNC milling

CNC turned components

Aerospace CNC machining

Custom CNC milling

Brass turned components

5 axis CNC machining

CNC milling services

CNC Turning services

Swiss precision machining

CNC milling parts

CNC Turning parts

CNC prototype machining

CNC machined parts

Aluminum CNC Turning parts

Machine shop services

CNC machined services

Steel CNC Turning

CNC machining parts

Precision machined parts

Plastic machining

CNC company

Aluminum machining

Metal machining

CNC machine shop

Steel machining

Machining aluminum

Material Available:

Stainless Steel

SS303, SS304, SS316, SS416 etc.


mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc.


HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc.


C11000, C12000, C12000, C26000, C51000 etc.


AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc.


A36, 45#, 1213, 12L14, 1215 etc.


ABS, PC, PE, POM, Delrin, Nylon, Teflon, PP,PEI, Peek.Carbon Fiber


OAK, Rosewood, Rubber Wood, Beech, Cherry

Surface Finish:

Aluminum parts

Clear Anodized
Color Anodized
Sandblast Anodized
Chemical Film

Stainless Steel parts

Laser engraving


Zinc plating
Oxide black
Nickel plating
Chrome plating
Heat treatment
Powder Coated


Chrome plating
Laser engraving

What Are The Advantages of Working With Us?

Our Capacity:

CNC Turning

φ0.5 - φ300 * 750 mm

+/-0.005 mm

CNC Milling

510 * 1020 * 500 mm(max)

+/-0.01 mm

CNC Machining

1000 * 1000 mm(max)

+/-0.01 mm

Drawing Format


Test Equipment

Projector, CMM, Altimeter, Micrometer, Thread Gauge, Calipers, Pin Gauge etc.

Our Fast Service:

Quotation Speed

We are aiming at to quote the parts in one working date.

Samples Delivery

It will take us 7 days to make the samples.

Mass production delivery

Our mass production time is about 15-20 days according to different quantity.


Sometimes we use DHL/FedEx/UPS/TNT to make the air ship; normally our parts are shipped by sea.

Tooling time

For the stamping parts, the tooling time is 20 days; for injection mold, it will need about 30 days.

7 tips to operate the CNC Lathe Machines

CNC (computer numerical control) tools such as lathes have become a vital part of manufacturing in a wide variety of industries. With a CNC lathe, you can easily produce complex parts that would be very difficult to machine on a manual lathe. A CNC lathe still requires significant skill to operate properly, but you can learn basic CNC machining techniques with the right training and practice. Below are some tips for newer machines.

Tip 1.Load the part program into the lathe if it is not already there. On newer machines, use a USB drive to transfer programs from a computer to the machine. With old machines, you may need to use a serial connection to the computer or even a 3.5-inch floppy disk.
Tip 2.Load the workpiece into the lathe. Make sure the chuck or collet has a tight grip on the workpiece.
Tip 3.Load the necessary tools into the lathe. The tools you will need for a given program, as well as the turret slots in which they should be placed, will have been determined at the time the program was written. If you will be using a program you did not write, consult the programmer if you have any questions about which tools to use.
Tip 4.Turn on the coolant pump and move the nozzle so the coolant stream is hitting the tip of the tool. Repeat this step for each tool.
Tip 5.Set the tool offsets. Slowly bring each tool toward the tool setter on the lathe until you hear a beep. Record the tool's position in the tool offset screen under the appropriate tool number. Repeat this procedure to set the X and Z offsets for each tool. For some programs, you will also have to record the tip radius of certain cutting tools in the tool offset screen. The tip radius should be found either marked on the tool or in the documentation for the tool.
Tip 6.Set the work offset. Rotate the turret to one of the cutting tools for which you have set the tool offset. Start the spindle and manually jog the cutter so that it faces off the end of the workpiece, leaving a smooth surface. Record the tool's position under the Z-axis work offset.
Tip 7. Run the part program. Watch the machine to make sure the program works as intended. Be ready to stop the machine immediately if something goes wrong.

If you are interested to become a CNC lather, you could try to find a job in our workshop. Currently, we have more than 35 CNC Lathe machines, our operators have more than 8 working experience in this field, we could train you. Then more and more custom CNC parts will be sold to our customers.
KUNSHAN DESHENGRUI MACHINERY CO., LTD can provide CNC Machining service, which specialized in developing, manufacturing and exporting mechanical products for many years.